How To Install and Configure MRTG On Linux (CentOS 5)

By:Rupinder Singh | August 13, 2012 | Comments:(0)

  • Tweet This!
  • Share This
  • Digg it!
  • Add to Delicious!
  • Stumble it
  • Share on google plus

The Multi Router Traffic Grapher (MRTG) is a tool to monitor the traffic load on network links. MRTG generates HTML pages containing PNG images which provide a LIVE visual representation of this traffic. MRTG is written in Perl and comes with full source code.

In this article, we will go through the installation of MRTG on a centos system to monitor the network traffic on a router. Here, the server ‘192.168.1.59’ is the web server running CentOS5 where we need to install MRTG for traffic monitoring and ‘192.168.1.254’ is the router for which network traffic need to be monitored.

MRTG on linux, assemblein.info

Step 1: Install MRTG on web server ‘192.168.1.59’

CentOS provides MRTG package which can be installed using yum.

yum install mrtg

Step 2: Configuring MRTG

Next, we need to configure mrtg for monitoring a network device. This is done by creating a mrtg.cfg file which defines what you want to monitor. MRTG provides a binary ‘cfgmaker’ to automatically create the configuration file ‘mrtg.cfg’.

/usr/bin/cfgmaker –global ‘WorkDir: /var/www/html/mymrtg’ vsnl@192.168.1.254 –output /etc/mrtg/mrtg.cfg

This command will create the mrtg configuration file ‘/etc/mrtg/mrtg.cfg’ and will set the ‘workdir’ (which is /var/www/html/mymrtg here) to store the MRTG graphs. The directory ‘/var/www/html’ is the default document root for this web server. ‘vsnl’ is the read only community name of the device you want to create a configuration for. If you are using the wrong community name you will get no response from the device. ‘192.168.1.254’ is the IP address of the SNMP-manageable device (This configuration should be done in the router which we will discuss later).

Step 3 : Run MRTG

After creating the configuration file, you can run MRTG to create MRTG graphs for the first time.

/usr/bin/mrtg /etc/mrtg/mrtg.cfg

This will query the router and also create the first mrtg traffic graphs and web pages. When you run mrtg for the first time, there will be a lot of complaints about missing log files, which you can safely ignore.

Step 4 : Create the index file for mrtg to access it through browser

Run the ‘indexmaker’ command to create the index file.

/usr/bin/indexmaker –output index.html /etc/mrtg/mrtg.cfg

Step 5: Add cron job to periodically run mrtg

Edit the crontab using ‘crontab –e’ and add the following cron job.

*/5 * * * * usr/bin/mrtg /etc/mrtg/mrtg.cfg –logging /var/log/mrtg.log

Router Side Configuration
Step 1: Verify snmp is installed and running

CentOS provides snmp package for installation which can be installed using yum.

yum install net-snmp net-snmp-utils

Step 2: Configure snmpd

In order for the MRTG to poll information from a Router (or a server), we need to setup read-only (public) community on the router. For this, you need to edit the configuration file ‘/etc/snmp/snmpd.conf’ with the following contents.

rocommunity vsnl
interface eth0
agentaddress 192.168.1.254:161

Now, restart snmpd.

chkconfig snmpd on
service snmpd restart

The configuration part is completed. Now, you will be able to view the network traffic using the link

http://192.168.1.59/mymrtg/

A sample graph can be seen as follows.

MRTG Graph

About The Author

Rupinder Singh

Rupinder Singh

Rupinder singh, Network Admin in reputated Institute and a Web developer. Enriching skill's in Penetration testing with BackTrack Linux, network security, Repository building, and web site building using Drupal, Joomla and Wordpress. Have interest in Free and Open source softwares. . . . . . . In Simple Words " I AM A GEEK" Join me on Google +

Leave a Reply


9 + nine =

Previous Story
Next Story

Top Bloggers